188.8.131.52. Preliminary check of adjustment of installation of wheels
Check pressure in tires, bring pressure in them to norm.
Check a gap in bearings of forward wheels and adjust it if necessary.
Check a beating of the tire and a wheel.
Check spherical hinges and the steering drive for existence of excessive gaps.
Shake the car for check of operation of shock-absorbers.
The car has to be unloaded. Fill completely fuel tank and put it on a horizontal plain surface.
Levels of cooling liquid of the engine and engine oil have to be normal.
The spare wheel, jack and the tool – are on regular places.
Measure height from the center of a wheel to edge of a wing.
The difference between result of measurement should not exceed 10 mm at the left and on the right.
Fig. 4.1. Scheme of preliminary check of angles of installation of wheels