Remove an old balance weight of a wheel.

Remove the bilateral adhesive tape which remained on a wheel, then clear and degrease the contact platform.

Establish a wheel on the machine for balancing of wheels, measure the size and the provision of an imbalance in the mode for usual balance weights.

Fig. 4.7. Scheme of installation of a balance weight

You will increase imbalance size on 1,6 to receive value of mass of a balance weight (fig. 4.7).

Choose a balance weight, the closest on weight, establish a balance weight in the situation (outside) specified by the machine for balancing of wheels.

Example of calculation of mass of freight for the set imbalance size:

23 g ґ 1,6 = 36,8 g.

Necessary mass of freight: 35 g.

NOTE Use freight the weight close to settlement. Example: 32,4 g = 30 g, 32,5 g = 35 g.

ATTENTION Use an original counterbalance or equivalent (steel). At installation of a balance weight press it during 2 with with a force of 25 N on each 5 g.

Fig. 4.8. Scheme of installation of two balance weights

At installation of two freights place them so that they settled down on both sides of a rim in the situation specified by the machine for balancing of wheels (fig. 4.8).

ATTENTION – Do not row freights. – Do not impose freights at each other. – Total weight should not exceed 160 g.