d22f196b

2.3.1.2. Replacement of engine oil

Set the vehicle on a horizontal surface.
Warm up the engine up to the normal working temperature.
Stop the engine and wait 5 min.
Take out the probe for measurement of level of oil.
Make sure that oil level – between tags of F and L on the probe and estimate a condition of engine oil. If oil level – is lower than a tag of L, add oil.

ATTENTION
If in the course of oil replacement some of its quantity incidentally gets on working parts of the engine, wipe it as it is possible more carefully. The remains not of threadbare oil can cause smoke in a motor compartment.

Uncover an oil-filling mouth and a drain stopper of the oil pallet and an oil filter.
Merge engine oil in a container.
Establish a drain stopper of an oil filter with a new sealing ring.
Inhaling moment (drain stopper of an oil filter): 9–10 N · m.
Clear a flange of a drain stopper of the oil pallet and establish a stopper into place.
Inhaling moment (drain stopper of the oil pallet): 25–30 N · m.
Again fill in in the engine engine oil of the specified type and in the specified quantity.

NOTE
The recommended oil (see chapter 1 of the present edition "Operation Manual and to Maintenance")