Mazda:: 3: Z-engine mechanical part

2.6. The Z6 engine – a mechanical part

Check of a belt of the drive of auxiliary units

Procedure of check

Replacement of a driving belt

Check of an automatic natyazhitel of a driving belt

Check of thermal gaps in the mechanism of the drive of valves

Adjustment of thermal gaps in the mechanism of the drive of valves

Check of a compression

Removal and installation of a chain of the drive of the mechanism of gas distribution

Removal of a natyazhitel of a chain

Removal of a chain of the drive of the mechanism of gas distribution

Installation of a chain of the drive of the mechanism of gas distribution

Installation of a chain of the drive of the mechanism of gas distribution

Installation of a support of the engine No. 3

Installation of a support of a bolt of fastening of a pulley of a bent shaft

Installation of a cover of a head of the block of cylinders

Final installation

Replacement of laying of the block of cylinders

Installation of a cover of the bearing of a cam-shaft

Replacement of a forward epiploon of a bent shaft

Replacement of a back epiploon of a bent shaft

Removal and installation of the engine

Removal of the socket of the main block of safety locks

Removal of support of the engine No. 3 and No. 4

Removal of a support of the engine and No. 4

Installation of a support of the engine and No. 4

Installation of a support of the engine No. 3

Fig. 2.232. Z6 engine components: 1 – driving belt; 2 – automatic natyazhitel of a driving belt; 3 – valve pusher; 4 – gas distribution mechanism drive chain; 5 – laying of a head of the block of cylinders; 6 – forward epiploon; 7 – back epiploon; 8 – engine; 9 – the operating oil valve (the operating oil valve); 10 – executive mechanism of change of phases of gas distribution