18.104.22.168. Removal and installation of the oil pallet
Stop the engine and wait, so far the engine and engine oil will not cool down.
Disconnect a negative wire of the rechargeable battery.
Remove the lower protective cover.
Merge engine oil.
Remove a forward cover of the engine.
Fig. 2.205. Removal of the oil pallet: 1 – masloizmeritelny probe; 2 – oil pallet
Pick up the phone of the masloizmeritelny probe and the oil pallet (fig. 2.205).
Fig. 2.206. Alignment of the oil pallet on the block of cylinders
Use a corner to level the oil pallet on the block of cylinders from a forward cover of the engine (fig. 2.206).
Fig. 2.207. Putting sealant before installation of the oil pallet
Apply kremniyevoorganichesky sealant on the interfaced surface of the oil pallet, as shown in the figure 2.207.
Fig. 2.208. Order of tightening of bolts of fastening of the oil pallet
Tighten bolts of fastening of the pallet in the order specified in the figure 2.208.
Check oil level.
Start the engine and check lack of leak of oil. In the presence of leak define a defective part, repair or replace it.