18.104.22.168. Installation of a cover of the bearing of a cam-shaft
Establish a cam-shaft in the provision of VMT of the cylinder No. 1, and establish a cam-shaft.
Fig. 2.275. Provisions of installation of covers of bearings of a cam-shaft
Establish covers of bearings of a cam-shaft in the specified provisions, as shown in the figure 2.275, and then temporarily tighten bolts of fastening of a cover of bearings No. 2 and No. 7 of a cam-shaft.
Fig. 2.276. Order of tightening of bolts of fastening of covers of bearings of a cam-shaft
Tighten bolts of fastening of covers of bearings of a cam-shaft in 2–3 passes evenly in the order shown in the figure 2.276.
Inhaling moment: 11,3–14,2 N · m.
Install other components as it should be, the return to removal.
Check a compression.