Uncover the rechargeable battery.

Disconnect a negative wire from the rechargeable battery.

Merge cooling liquid from the engine.

Remove the following elements:

– forward wheel (right);

– lower cover and mudguard (right);

– knot of the air filter;

– ignition coils;

Fig. 2.252. Gas distribution mechanism drive chain components: 1 – cover of a head of the block of cylinders; 2 – bolt of fastening of a pulley of a bent shaft; 3 – pulley of a bent shaft; 4 – tension pulley; 5 – automatic natyazhitel of a driving belt; 6 – engine No. 3 support; 7 – tube of the control probe of level of oil; 8 – forward cover of the engine; 9 – natyazhitel of a chain; 10 – lever of a natyazhitel of a chain; 11 – sending to a chain; 12 – gas distribution mechanism drive chain; 13 – asterisk of a bent shaft; 14 – spline

– driving belt;

– the pump of the hydraulic booster of steering without detachment of an oil hose and an oil pipeline.

NOTE Fix the pump of the hydraulic booster of steering by a rope in the situation which is not preventing service.

Remove a tank of cooling liquid and the amplifier of steering with the connected hoses and pipelines.

Remove the generator.

Remove the pump of cooling liquid

Remove an accelerator rope arm (from a body)

Disconnect a grounding wire (an engine No. 3 support)

Disconnect the following elements:

– ventilation hose;

– a plait of wires of the operating oil valve;

– socket of the sensor of position of the crankshaft.

Uncover a head of the block of cylinders.

Fig. 2.253. Fixing of a pulley of a bent shaft

Record a pulley of a bent shaft, using special devices and remove a bolt of fastening of a pulley of a bent shaft (fig. 2.253).

Remove a pulley of a bent shaft, a tension pulley and an automatic natyazhitel of a driving belt.

Fig. 2.254. A motor jack for fixing of the engine before removal of a support No. 3

Fix the engine, using a motor jack and the extra and remove a support No. 3 (fig. 2.254).

Pick up the phone of the control probe of level of oil.

Remove a forward cover of the engine.

Fig. 2.255. Removal of a forward epiploon

Remove a forward epiploon, using the screw-driver with flat shliyets (fig. 2.255).