Fig. 2.262. Places of putting sealant on a forward cover of the engine

Apply kremniyevoorganichesky sealant on a forward cover of the engine, as shown in the figure 2.262.

ATTENTION Establish a forward cover of the engine through 10 minposl of putting kremniyevoorganichesky sealant.

Thickness of the roller of the applied sealant: 2–4 mm.

Fig. 2.263. Order of tightening of bolts of fastening of a forward cover of the engine

Tighten bolts of fastening of a forward cover of the engine in the order shown in the figure 2.263.

Establish a bolt No. 1, using a new sealing washer.

Apply pure engine oil on a forward epiploon.

Insert a forward epiploon into a forward cover of the engine hands.

Fig. 2.264. Press fitting of a forward epiploon

Press a forward epiploon, using special adaptation and the hammer (fig. 2.264).

Press fitting depth: from a forward cover of the engine – 0–0.5 mm.

Fig. 2.265. Scheme of a press fitting of a new forward epiploon