1. Include system a cruise control, having pressed the main ON/OFF switch.

2. Accelerate the car to the required speed (not less than 30 km/h).

Press and release the SET/COAST switch at a car speed which is required to be supported. At the same time release an accelerator pedal.

Do not hold the switch in the pressed situation. Otherwise, if the driver does not press an accelerator pedal, the speed of the car will decrease until the button of the switch is not released. At the same time you can pass the required speed.

NOTE The SET function of installation of the required speed can be included not earlier than through 2 from later pressing the main ON/OFF switch. On an abrupt bias the car can quickly lose speed at the movement on rise or quickly gain speed at the movement on descent.