Remove a head of the block of cylinders.

Remove the oil pallet (see the Appendix 1).

Remove an oil filter (see the Appendix 1).

Remove the oil cooler (see the Appendix 1).

Remove the detonation sensor.

Remove an oil separator.

Remove the thermostat (see the Appendix 1).

Remove the pump of cooling liquid (see the Appendix 1).

Remove a mesh oil filter (see the Appendix 1).

Remove the oil pump (see the Appendix 1).

Fig. 2.127. Components of the first stage of dismantling of the block of cylinders: 1 – oil pallet; 2 – cover of an oil filter; 3 – oil filter; 4 – adapter of an oil filter; 5 – oil cooler; 6 – detonation sensor; 7 – oil separator; 8 – thermostat; 9 – pump of cooling liquid; 10 – mesh oil filter; 11 – oil pump; 12 – a flywheel (model with the mechanical transmission), a drive plate (models with the automatic transmission); 13 – a trailer disk (model with the mechanical transmission); 14 – back epiploon

Remove a flywheel (models with the mechanical transmission). For removal of a drive plate (model with the automatic transmission):

Fig. 2.128. Keeping of a bent shaft from a provorachivaniye by means of special adaptation

hold a bent shaft from a provorachivaniye by means of special adaptation (fig. 2.128);

Fig. 2.129. Components of a drive plate and order of an otvorachivaniye of bolts of fastening: 1 – bolt; 2 – adapter; 3 – drive plate

turn off bolts for several receptions in the order specified in the figure 2.129.

Remove a trailer disk (models with the mechanical transmission).

Remove a back epiploon (see further).