The sequence of check of level of oil is given below.

1. Install the car on a plain surface.

2. Turn off a jellied stopper and remove a washer.

3. Make sure that oil in the transmission reaches the level of the lower edge of a jellied opening. If necessary bring oil level in the transmission to the established norm. Use oil of the same type that is filled in in the transmission.

- Quality of oil on API – GL-4 or GL-5.

- Viscosity of oil on SAE:

- all-weather – SAE 75W-90;

- it is above 10 °C – SAE 80W-90.

4. Establish a new washer and wrap a jellied stopper.

- The inhaling moment – 40–58 N · m.

- The procedure of replacement of oil in MKPP is described below.

1. Turn off a drain stopper.

2. Merge oil in capacity.

3. Establish a new washer and wrap a drain stopper.

- The inhaling moment – 40–58 N · m.

4. Turn off a jellied stopper and remove a washer. Fill in oil in the transmission to the level of the lower edge of a jellied opening.

- Quality of oil on API – GL-4 or GL-5.

- Viscosity of oil on SAE:

- all-weather – SAE75W-90;

- it is above 10 °C – SAE 80W-90.

- The volume of the filled-in oil – 2,7 l.

5. Establish a new washer and wrap a jellied stopper.